Seagull #MAP-X2
Details
• High Data Rate Sampling: 4Hz MB, 5Hz RTK, 10Hz RAW, 10Hz GNSS
• Direct Camera Feedback: 1:1 ratio between photos & coordinates
• Various Trigger Modes: Shoe-state, ACT, PWM, Button, Timelapse
• Trigger and LOG: with or without SYNC feedback
• EasyGeotagging: Pix4D, EXIF
• IMU Compatible: increased precision for ORTOPHOTO and 3D model processes
• Extensive Camera Compatibility: simply switch to a different camera cable
• Wide Range of Flight Controllers Supported: navigation and triggering
• Modular Design: compatible with existing and future Seagull products
• Multiple brand GNSS receivers supported!
• Representation of #X2 with #GPK GNSS receivers, #RADIO, #IMU and #SYNC2
The Following Hardware is Supported:
Flight Controllers:
• Pixhawk 1
• Pixhawk 2.1
• Pixracer
• APM 2.6
• APM 2.5
• DJI Wookong
• DJI A2
• DJI A3
• And many others
R/C radio systems: That interfaces with standard PWM signal (almost any radio system)
Seagull:
• #GPK
• #IMU
• #SYNC2
IN THE BOX:
• Seagull #MAP-X2 x1
• Servo cables (30cm length) x2
• 128MB micro SD card (w/ full size adaptor) x1
• #GPK to #MAP-X2 cable (Purple) x1
SPECIFICATIONS:
• Voltage: 3.9-12V (5 volts recommended – do NOT exceed 12V)
• Current draw: 17mA MIN, 43mA Average, 55mA MAX
• Input signal: 3.3V standard R/C PWM between 1000-2000μS
• Dimensions: 48 x 40 x 11mm
• Weight: 20g
• Direct Camera Feedback: 1:1 ratio between photos & coordinates
• Various Trigger Modes: Shoe-state, ACT, PWM, Button, Timelapse
• Trigger and LOG: with or without SYNC feedback
• EasyGeotagging: Pix4D, EXIF
• IMU Compatible: increased precision for ORTOPHOTO and 3D model processes
• Extensive Camera Compatibility: simply switch to a different camera cable
• Wide Range of Flight Controllers Supported: navigation and triggering
• Modular Design: compatible with existing and future Seagull products
• Multiple brand GNSS receivers supported!
• Representation of #X2 with #GPK GNSS receivers, #RADIO, #IMU and #SYNC2
The Following Hardware is Supported:
Flight Controllers:
• Pixhawk 1
• Pixhawk 2.1
• Pixracer
• APM 2.6
• APM 2.5
• DJI Wookong
• DJI A2
• DJI A3
• And many others
R/C radio systems: That interfaces with standard PWM signal (almost any radio system)
Seagull:
• #GPK
• #IMU
• #SYNC2
IN THE BOX:
• Seagull #MAP-X2 x1
• Servo cables (30cm length) x2
• 128MB micro SD card (w/ full size adaptor) x1
• #GPK to #MAP-X2 cable (Purple) x1
SPECIFICATIONS:
• Voltage: 3.9-12V (5 volts recommended – do NOT exceed 12V)
• Current draw: 17mA MIN, 43mA Average, 55mA MAX
• Input signal: 3.3V standard R/C PWM between 1000-2000μS
• Dimensions: 48 x 40 x 11mm
• Weight: 20g